Newly Launched

Cuzor Mini UPS for AirFiber

Upto
4 hours
Backup.
Built-in EV-grade 3C batteries ensure reliable backup for your AirFiber. A brief outage or an extended power cut - Cuzor Mini UPS for AirFiber keeps your internet running.
BIS
Certified
4x
2900
mAh Batteries
More Power, Less Heat, Lasts Longer

Compact. Lightweight.
Wall-Mount Ready.

Easy installation. Designed to seamlessly disappear into your setup.

1 Year replacement warranty.

Having trouble? We pickup your old unit and ship a new one to your doorstep.

Zero Lag Switching.

Avoid router restarts duringpowercuts. Enjoy uninterruptedconnectivity.

Native PoE Design.
Purpose-Built for AirFiber.

Power your indoor and outdoor units seamlessly, from a single UPS

54V passive PoE output for the outdoor antenna and a stable 12V output for the indoor router

No Energy Wastage.

No Double Conversion.

Direct regulated DC outputs reduces energy loss and gives longer usable backup.

No more DC→AC→DC conversion

Engineered for a Superior Experience.

Smart Battery Power Distribution Management.

Built-in EV-grade 3C batteries power your AirFiber connection through outages. From sudden power cuts to longer disruptions, stay connected with up to 4 hours of reliable backup.

4x2900

mAh Batteries

Overcharging protection

Overcharging protection

Up to 20% More Efficient Power Design.

Cut down losses due to typical double power conversions

Others
Battery → DC → AC → Device converts back to DC → Loss
Cuzor
Direct regulated DC (12V + 54V PoE) → Higher usable backup

Purpose-Built for your AirFiber

Complete Backup for Both Outdoor Unit & Router

Smart Battery Power Distribution Management.

Built-in EV-grade 3C batteries power your AirFiber connection through outages. From sudden power cuts to longer disruptions, stay connected with up to 4 hours of reliable backup.

4x2900

mAh Batteries

Overcharging protection

Overcharging protection

Up to 20% More Efficient Power Design.

Cut down losses due to typical double power conversions

Others
Battery → DC → AC → Device converts back to DC → Loss
Cuzor
Direct regulated DC (12V + 54V PoE) → Higher usable backup

Purpose-Built for your AirFiber

Complete Backup for Both Outdoor Unit & Router

Indicators

Reliable indicators for real-time status.

3 states LED indicator

Charging
Full charge
On Battery
Inside the box

Packed with objects to make your life better.

Setup with confidence. Download the installation guide.

Technical Specifications

Model : MiniUPS for AirFiber
Product Specs
Compatible Devices
Jio AirFiber (PoE), Jio AirFiber Plus (PoE), Airtel AirFiber (PoE & Non-PoE)
Input Ports
DC Jack (12V input from adapter); Ethernet Port (54V input via bridge cable)
Output Ports
12V Output (via bridge cable)
I/O Ports
Ethernet Port with PoE (data + 54V injection); Ethernet Port (data to router)
PoE Output
Passive PoE, 54V Fixed
PoE Power
15W (54V @ 277mA)
PoE Pin Configuration
Pins 4-5 (+), Pins 7-8 (GND)
Router Output Voltage
12V Fixed
Max Output Current (Router)
3A
Power Topology
Buck Converter(for 12V), Boost Converter(for 54V)
Efficiency
~87%
Battery Type
4 × 18650 Lithium-ion Cells
Battery Capacity
2900mAh per cell
Battery Pack Size
75 × 70 × 26 mm
BMS Protection
Overcharge: 4.2V; Discharge Cutoff: 3.2V
Charging Current
500mA
Charging Mode
CC Mode, CV Mode
Charge Cutoff Voltage
16.67V
Switchover Time
PoE: ≤50V @ 277mA; Router: ≤11.4V @ 1A
LED Indicators
Red: Battery Mode; Green: Fully Charged (≥16.5V); Yellow: Charging
Power Switch Modes
ON: Powers router + antenna + LEDs; OFF: Disables outputs, charging still active
Input Rating
12V DC
All specifications are measured at 25°C ambient temperature unless otherwise noted.

Built to perform, so power cuts don’t break your connection.